Ken's Corner (Bass Forums Sponsored By KSB)

Ken's Corner (Bass Forums Sponsored By KSB) (http://www.smithbassforums.com//index.php)

- Woods, Electronics, & Components (http://www.smithbassforums.com//forumdisplay.php?f=32)

- - Wiring diagram (http://www.smithbassforums.com//showthread.php?t=488)

Dave Cody

09-04-2007 08:36 AM

Wiring diagram

I had to refinish my '85 Bt Custom. (long story) and removed the electronics in a rush does anyone have a diagram?
Help....

on the plus side the refin came out great and I found a 2nd BT Custom w/ a PJ set up and just have to have to come up with the cash

Dave

Ken Smith

09-04-2007 11:00 AM

Diagram?

Quote:

Originally Posted by Dave Cody (Post 6445)

The Circuit comes out all in one piece unless you messed up and took thinks apart in there. Did you re-shield all the cavities as well and connect them all with paint thru the wire holes like we do when we make them?

We don't have Diagrams. We work by memory and die with our secrets..lol

Dave Cody

09-04-2007 02:13 PM

Thanks Ken,

Reshielded... yep
All on one board .... Thanks made everything much easier
Where I screwed the pooch was the Pick-ups and out put jack.
I'm 98% sure I have the Pick-ups wired in right. have black, white and red wires and not a clue what goes where

Ken Smith

09-04-2007 02:47 PM

PUs and jack

Quote:

Originally Posted by Dave Cody (Post 6454)

The jack should plug in the circuit and come out with the wires attached. the Pickups the same.

All times are GMT -4. The time now is 01:33 PM.