Ken's Corner (Bass Forums Sponsored By KSB)

Ken's Corner (Bass Forums Sponsored By KSB) (http://www.smithbassforums.com//index.php)
-   Smith Basses, Handmade (http://www.smithbassforums.com//forumdisplay.php?f=31)
-   -   Silver strap locks w/ gold hardware? (http://www.smithbassforums.com//showthread.php?t=2209)

Joshua Phelps 09-30-2012 04:13 PM

Silver strap locks w/ gold hardware?
 
Was it ever "standard" to put silver strap locks on smiths with gold bridge & tuners?

Ken Smith 09-30-2012 04:21 PM

Quote:

Originally Posted by Joshua Phelps (Post 25348)
Was it ever "standard" to put silver strap locks on smiths with gold bridge & tuners?

At one time, ages ago, the straploks were only available in a silver colored Nickle finish. Now we have 3 colors. I don't remember the dates, sorry.

Joshua Phelps 09-30-2012 05:00 PM

Thanks ken
 
I've seen smiths up to as late as 2001 with them. Kinda cool & representive of the time period. They matched the jacks too. Thanks for the reply ken

Ken Smith 09-30-2012 05:54 PM

2001?
 
Quote:

Originally Posted by Joshua Phelps (Post 25350)
I've seen smiths up to as late as 2001 with them. Kinda cool & representive of the time period. They matched the jacks too. Thanks for the reply ken

Jacks are always nickle/chrome color. In 2001 we had colors, I am sure. The brass plating on the Loks DO wear off. The gold on the Bridge and Tuners are from two different worlds and do not match 100% in the plating color. The Loks as well are from a different source and we almost never used gold plating, only brass plating because of the heavy wear.

Some people DO change their hardware parts and not necessarily the Loks. From here, they go out matched in color.

Joshua Phelps 10-01-2012 09:31 AM

finishes
 
so the brass locks lose their finish slower than the gold platted ones?

Ken Smith 10-01-2012 02:26 PM

Quote:

Originally Posted by Joshua Phelps (Post 25354)
so the brass locks lose their finish slower than the gold platted ones?

I don't know for sure but why waste the cost of gold plating if it will wear down to Nickle from usage? We use the brass plated ones unless there is a mistake in ordering or shipping from them.


All times are GMT -4. The time now is 08:23 PM.

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 - Ken Smith Basses, LTD. (All Rights Reserved)