Quote:
Originally Posted by Arnold Schnitzer
Calvin, it's important that the fingerboard arch be set properly before the bridge curvature can be worked out. If the fingerboard is too flat (cross-ways) the outside strings will have to be low or you won't be able to bow the bass. If you are going to use 25mm spacing at the bridge, which is quite narrow (27-28 is "normal"), the fingerboard will need to be more arched than usual. I hope this is clear and helpful...
|
Thank you for the reply. Very clear, very helpful. The bass came with 25mm, and it bows fine, so I'll leave it that way. Seems that I need the fingerboard plained properly and then the bridge set-up in accordance with 4,5,6,7or8.