??
Lasers, patterns, frequencies, research.... VOODOO
What ever happened to listening and feeling?
Unless you take the EXACT same Bass and keep remaking it with various backs and bracings you are Pissing in the wind.
You cannot compare Backs or bracings on different basses. There is that 'different bass' factor you are forgetting about.
I own many basses that were altered from one system to another, flat and round back. In this way we can tell BUT, even so, other restoration work was performed as well. Still, the other work performed had somewhat predictable results as it was not new science added into the bass so I am fairly certain I know what I am hearing when I listen to the changes.
Changing a bass from a 3, 4 or 5 piece brace system to a single 1/2 X brace with a bottom left angles bar (I have some like that) frees up the back in two ways. One, it can move easier with the weather and two, the sound spread up the back is aided by the long singe brace. The bottom angled Bar forms a an inverted 'V' pattern at the bottom with the longer brace to stabilize the wider lower bout.
On one of the basses like that it has an angle bend but is covered in sheer cut linen. It was left alone, unbraced or modified from the maker in 2007, England. The other is Italian about 30 years old, Cello-like un-tapered ribs, no angle break. Both of these basses were set up and played before the modification was done. Only set-up work was performed mainly other than the back work and some repairs that came about after the sound was evaluated.
I don't do this work myself but I do play the basses and my ear is pretty good.
I have two other basses in restoration that will be modified as well. One is an Italian round back and it will get a center brace. The back is fine but I like the idea. The other is an old Flat back pedigree (can't tell you for business reasons) and it had normal bracings before. It will get the modified X as mentioned before and what ever else it looks to need after all the back cracks are repaired and evaluated.
One other bass I have in repair is a large French bass with a single wide center brace. That will be modified to a normal center brace, one lower centered at the bottom bout and one upper brace just above the upper corner.
My Hart is a flatback with only a center brace and a lower brace. All braces other than center or X are shaped like a bassbar, never the wide flat ones you see in normal basses. The angle break has linen and vertical finger patches spaces along the bend.
Each bass got what it needed. No patterns here, just careful thought.
|