is there a reason why linen pieces are not used solely for cleating . I've seen firsthand how a misplaced (in perfect line with the grain) and much too long piece of linen can split a top up due to its shrinkage after gluing,meaning that its not weak stuff ?
I have always wondered about the diamond shape verses the square shaped cleats. That is until I heard about a test that was done by some Austrian college students using two identical tops. On one top two rolls of diamond shaped cleats where glued and the other had larger and thinner square shaped cleats. Adding vibration to the two in equal amounts, the square cleated top continued to vibrate 4 to 6 seconds longer than the diamond one consistantly over several experiments. Fine wood dust was spread around the edges of each top and again vibration was applied to the tops. The thin square cleated ones produced a more even and smoother and a bit faster movement of the dust when ****yzed. I would give serious consideration to the thinner and larger square cleats- just thought I would share that for what it's worth.
Last edited by Adrian Levi; 01-16-2011 at 03:08 PM.
Reason: adding extra text
|