View Single Post
  #7  
Old 07-13-2010, 05:19 PM
Ken Smith's Avatar
Ken Smith Ken Smith is offline
Bassist, Luthier & Admin
 
Join Date: 01-18-2007
Location: Perkasie, PA
Posts: 4,851
Ken Smith is on a distinguished road
Default well...

Quote:
Originally Posted by Eric Swanson View Post
Interesting point. I went back and forth with Mr. Pasewicz, over a few days, on that very issue. I was concerned about both being a good steward for the bow and with resale. I was also concerned with his opinion as a craftsman, as to which would yield a more "sound" bow.

He said, that in this case, the devaluation would be a "wash." The original frog had nickel mounts. The new frog (with matching nut) would have silver mounts, hence, higher value. He also said that a modern frog and nut would yield a more structurally sound bow, in his opinion.

Thus, in either case, he estimated a drop in value of about 15%; either with the restored frog and nut (with nickel) or the new frog and nut (with silver)

He also, with some humility, said that while the repaired frog would look almost as good as new, in a few years, there may be even better adhesives/technology for such restoration efforts. He talked about the significant advances that have happened in the world of epoxies, within the last few years.

He was willing and able to complete either option. The new frog will actually cost more than a rebuilt one. It seemed as if it would yield a more stable bow, however, of similar (but, as you say, reduced) value.

I am certainly no expert on these things. I am only sharing the little information/perspective I have on this particular case.
Personally, I would go with the restored way BUT, I haven't seen the damage so I'm shooting in the dark here.
Reply With Quote