Quote:
Originally Posted by Ronen Tat
Correct me if I'm wrong, it would be very difficult to deal with a non-pitched neck through, unless you inlay the bridge into the body - or you need to use a very low profile bridge.
|
Not at all IF, the Neck is Lifted up like a Bolt-on when made and glued up. That is how we made the 4 test basses back in 1982. I made 8 basses in one run, 4 with and 4 without pitch. Necks lifted about 1/8"/3mm without pitch or Fingerboard flush at body with 3 degree pitch, same bridge heights on both.