Quote:
Originally Posted by Adrian Levi
Ok , I've measured it up for you just like the dimensions in the pic, minus plates of course .
Length = 114 cm
lower bout width =65 cm
upper bout width=51,5 cm
c bout / corner to corner of bout ( i.e not from c bout to c bout , but each bout measured from top edge to bottom edge ) = 24,5 cm
rib depth = 20 cm
|
We speak inches here. I don't understand the C-bout measurement. You measures the height of the curve? Why? We usually only measure the width across the most narrow point. The upper and lower at their widest points.
In inches converted by /2.54 and rounded;
Length = 44 7/8" (this is body length?.. what is the String length?)
lower bout width = 25 5/8"
upper bout width= 20 1/4"
c bout / corner to corner of bout ( i.e not from c bout to c bout , but each bout measured from top edge to bottom edge ) = 9 5/8" (block to block?)
rib depth = 7 7/8"
Before the metric system, Europe used inches too I think. Violins measure at 14" as standard. My old English bass/violin books use inches for body sizes of basses.
Quote:
|
the rib depth is only 20cm (7 7/8")! Seems pretty petite to me
|
That is NOT in any way petite. Many many basses measure from 7.5". to just under 8". I just looked at my basses and the 7 7/8" I think came from 8" stock that finished down 1/8th inch in the making.
The basses of mine at 7 7/8" include the Hofner 5, Hart, Martini, Jacquet, Lombardi, Sirleto and Lott copy. I have a few that are 7 3/4" and one at 7 1/2" which was one of the loudest and deepest basses I ever had. Several are 8" and over but this 7 7/8" inches seems to be very common.