View Single Post
  #5  
Old 05-06-2010, 05:39 PM
Matthew Tucker's Avatar
Matthew Tucker Matthew Tucker is offline
Senior Posting Member
 
Join Date: 02-19-2007
Location: Sydney, Australia
Posts: 427
Matthew Tucker is on a distinguished road
Send a message via Skype™ to Matthew Tucker
Default

thanks Arnold. I have been as systematic as I can, and throughly breaking down the task into every small step and sequence is the only real way I know of estimating and explaining the cost of such a job for the client.

Yes my plan is to fix the front first. Then the ribs and block, then glue top back to ribs and attack the back. I'm not sure how best to remove the centre brace yet, it looks quite solidly glued in there, but it is split in several places.

On thing I have noticed is is is very neatly made inside; the blocks are the smoothest i have ever seen, it's almost as if the maker glued a veneer across the face of the entire block - but it doesn't seem to be the case. The linings in the C bout back edge are very hefty, too, about 12mm! and very neatly done. The break appears to start at the upper corners or just after the centre brace ends.

String length as far as I can make out is 104.5cm.

LOB 1160
UB 525
LB 675
ribs LB 197
ribs CB 200
ribs at neck 153
Reply With Quote