Quote:
Originally Posted by jeremy jones
The jack seems Ok its not loose all all. The connection is tight and makes a click noise when you plug in the cable like its seating into the jack. I don't see any crud or build up inside the jack so I would say its clean from what I can see anyway.
Im not sure how one would clean an input jack?
|
Based on what you have described and with the pics to support it, I'm not convinced it's the input jack just yet. However, you should clean your input jack and 1/4 cable plug ends on occasion with a good Contact/Control Cleaner & lubricant. You can get this at Radio Shack and it will last you a lifetime. How to? Don't spray it into and inside the input jack, just spray some onto your 1/4 cable plug-end (not dripping) and insert it into and out of the input jack a few times. Do the same thing to the inputs of your amp. This will remove any dirt and oxidation that may be there. Afterwards, wipe your 1/4 plug-ends dry.
While you are at Radio Shack, buy a new battery cap.