#1
|
|||
|
|||
need major help
First of all thanks for taking time to read this. I just purchased the 5 string flatops for a mod on my bass {none smith} and i have no clue as to how to hook it up. I have orderd a aguilar obp3 preamp with the vol,blend,bass ,tre, mid,mid selector switch and 2 series parallel switches. The preamp is coming pre wired but i dont have any diagrams on the pickups so i know what to solder to what tabs. i just know there are 6 tabs and the pickups are marked for the bridge and neck. Is there anybody out there thay can help?
|
#2
|
||||
|
||||
A good guitar tech maybe?
I would suggest not to do the mod yourself if you're not familiar with the connections... About the pickup wiring, not sure but I think it's not unlike other pickups, you can look for it on the net. Whatever you do just don't connect until you're 100% sure you know what you're doing |
#3
|
|||
|
|||
Wiring Preamp is separated from pickup wiring. Preamp has in and out, then ground (Usually Black) and cable (usually Red) for battery.
If you go to Aguilar's web site, there are wiring diagrams for your purpose. Also, if you go to other pickup maker's site, you will know how you could wire Series/Parallel (+ Tap, if you need). On the FT pickups I think this might be help. Pickups 1 2 3 4 5 6 2 Ring/large Tags (5 & 6) are ground (Case Earth). So you could connect them to ground or cold, if preamp is not buffer preamp. Switch (You need DPDT. One pickup needs one Switch separately.) 1 2 3 4 5 6 4 & 5 must be connected. 6 won't be connected and leave it alone. Pickup #1 will go to Switch #3 Pickup #2 will go to Switch #4 Pickup #3 will go to Switch #2 then this works as Ground Of a pickup. Pickup #4 will go to Switch #1 then this works as Hot Of a Pickup.
__________________
Sleek Elite |
#4
|
||||
|
||||
Quote:
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|