|
#1
|
|||
|
|||
Neck Relief
I have a 1990 Burner Custom 5 and would like to know about adjusting the neck. Is this a two way truss rod? If not will turning to the right increase
the relief. |
#2
|
||||
|
||||
Truss Rod Adj.
Hey Frank. Turning clockwise will decrease relief. Turning counter-clockwise will increase relief. NOTE: Make your adjustments in small increments (i.e. 1/4 turn's). If the neck/truss rod has not been abused and your frets are in good shape, you should be able to set your action low without fret-buzz (of course this depends on your playing style).
__________________
Tim Bishop |
#3
|
||||
|
||||
Question
How would you describe your action as it is now (before any adjustments)?
__________________
Tim Bishop |
#4
|
||||
|
||||
Adjusting the truss rod is for neck relief, not action. Once you have the right amount of relief the action is set at the bridge and nut. My point is, when adjusting the truss rod pay attention only to the neck, not the action. Take care of that later - at the bridge.
Of course, I could be wrong |
#5
|
||||
|
||||
Not exactly.
Quote:
__________________
Tim Bishop Last edited by Tim Bishop; 01-14-2012 at 02:09 PM. |
#6
|
||||
|
||||
Well, adjusting the neck IS indeed only for adjusting relief AND an integral part of what contributes to the action when the overall set-up has been completed.
|
#7
|
|||
|
|||
Neck relief
Thanks as I was tring to get a little more relief and now that i know it is counter clock wise I am glad I waited to find out. Neck relief is the first step in setting up a neck, without correct relief you have a hard time setting up the actiion.
|
#8
|
||||
|
||||
wrench..
Quote:
Turning towards the E/B takes out the relief. Turning towards the G loosens rod and increases the possibility of relief. |
#9
|
||||
|
||||
neck relief
I agree with tim here on the Neck Adjustment. Imo the Secret to a great setup & low action is a neck thats flat as possible & very level frets. Best setup i have ever Seen on a Bass Period (if you like very low action) was on a smith with a CRAZY flat neck. You Could Barely Slide a business card between the strings & the fret @ the 7th fret when fretting the 1st & 24th fret & unfretted the action was as low as i have ever seen on a bass. This Bass can Be Plucked pretty hard on all notes with 0% fret buzzing.
Think about it. Fingerboard wood is cut flat. Wouldnt it be Better for the wood also to not be bending foward? also wouldnt it make it easier to fret notes between the 3 & 12th fret without having to press the strings down another fraction of a mm due to alot of foward bow? Flat neck (flat as possible without fret buzz) is better for the wood & better for the Playability |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|