The purfling comes in at a heavy 3/16", or 1.12" or 7/64". The black is .30", and the cherry is .50" (My dial caliper measures in .00"). Its looks wide on the spruce side, but blends in nicely on the cherry back! It looks like two separate black stripes when inlayed in to the cherry wood.
Channel 2 mm deep, edge 6 mm thick, after trimming the edge to 5mm, there should be 3-4 mm of material under the purfling. How deep should I go? Does the depth create the so called hinge effect?
Last edited by Craig Regan; 12-24-2008 at 05:02 AM.
|
12-23-2008, 10:25 PM
Threaded Mode