Starting a DB Project

[Ruben E garcia]

Well as Arnold suggested I am going to be using Diamond Cleats, the cleats are about 1" each side and 1/8" thick and also with the grain running about 45 degrees ...

I am using this time an bigger chisel as Mathew suggested, he say that it will be more fun this way

I am going to be making few deep throat C clamps... as per Wayne Advise to use the right tool for the job (no lipstick sorry)

and Taking all apart and do it again as Ken also recommend for me to do






after making the clamps I am going to laid down the cleats but before I will send and picture for everybody to see what is going to be my plan