Beautiful bass-but which model is it?

[Ken Smith]

Originally Posted by alanreed

Hi
I managed to buy an amazing bass a few years ago but don’t know much about it and was hoping you KS pros could help me out (model, wood, hardware etc). I've attached a few photos to assist. I'm also thinking of selling it (hard times) and wonder if anyone could give me an idea of a fair price.
Thanks in advance.

The BT6G. This would be the Oil/Varnish finish. The pics are good but I can't see it being the high gloss lacquer as used on the Elite. If it is the heavier finished gloss Lacquer then it might be the BT6EG but the neck strips going down the back would be Morado instead of Bubinga like pictured here.

The two switches are not in the position that we put them so it's possible they were added later by someone else. Are they series/parallel?

This Bass from 1996 would also have the older 9v circuit as well.

I can't give you a price simply because I do not work in the used market.

Wood you ask? Bubinga top and back. The rest is on the spec sheet and can be ID'd here if you just look and try a little; http://www.kensmithbasses.com/woodpa...econtents.html

Hardware? Ours with the exception maybe of those two switches. Bridge and Tuners are Gold Plated.

Was this Bass re-finished recently? It looks brand new!

[alanreed]

Thanks very much for the info Ken and I'm sure you've heard it many times before but you make amazing basses.

I've had this one since 2006 and don't believe it's been re-finished. The previous owner treated it like a baby as have I.

As for the switches I've no clue when they were added but have attached a photo of the electrics to hopefully shed light on their purpose.

[Ken Smith]

Originally Posted by alanreed

Thanks very much for the info Ken and I'm sure you've heard it many times before but you make amazing basses.

I've had this one since 2006 and don't believe it's be re-finished. The previous owner treated it like a baby as have I.

As for the switches I've no clue when they were added but have attached a photo of the electrics to hopefully shed light on their purpose.

It looks like our wiring but that was in 1996 I guess. I can't tell 100% but let's assume it's original with the bass.

The switches in 1996 were a new thing and were optional so I am sure there were a few experiments as to placement looking back at it now. It's just that the position is different than the template I have so I am still puzzled about it. Our wire colors for the switches are different as well. They are orange, yellow, blue and brown.

As long as the work correctly it's ok..

[alanreed]

Thanks again Ken, it's great getting information from the boss as I can only imagine how busy you are.

[Ken Smith]

Originally Posted by alanreed

Thanks again Ken, it's great getting information from the boss as I can only imagine how busy you are.

I wish I was Busier. In this economy with a reduced staff I am busy doing more and different things than I usually do so yes, I am busy bit would love to have the problem of being 'too busy'.

[alanreed]

Well I wish you the best for the future - may you continue to make musicians dreams a reality, producing quality basses for many years to come

[Tim Bishop]

Given the 5 pc body; the laminate is maple. The body core is a bit more difficult to ID from the pics. My first guess would be Mahogany. In other pics it looks like Walnut or Cherry. At any rate, the bass looks nice and clean.

If you do follow through and sell it, start the price at $3.5k. Personally, if that were my bass and it was 100% original condition, no issues, and as clean as it looks, I wouldn't take a penny less. BUT, don't be surprised if you get a bit more than that starting price of $3.5k.