Help with my String/Bridge Height

[Ken Smith]

Originally Posted by Greg Clinkingbeard

I played a friends old Kay yesterday and the nut slots were so low I couldn't get a business card within 1/2" of the nut and the bass played great. I wouldn't tempt fate like that, but whadayaknow?

I can't slide a piece of paper under some of mine either and they play like butter. The Camber/fb curve makes up for this.

[Calvin Marks]

Hi all, so I decided to try plaining the bridge myself and am very pleased with the results. It was slightly more labor intensive than I thought it would be, but I suppose that makes sense considering how out of whack the string heights were to begin with.

This process took me 5 hours and I used some 120 grit sandpaper and a few different shaped rat-files.

I raised the adjusters to give me 9 mm on the E and then I began lowering the grooves. Once I got to 5.5/7/8/9 I had to sand off the top of the bridge...Really tiring work.

I decided to go for 5.5 instead of 6 on the G because I needed a bit more clearance from the D string.


Overall, I'm really happy with the results and I have all of you to thank!