Heavy on the mids

[Ken Smith]

Freddy Washington, Ricky Minor, Melvin Davis and many other top pros use similar model Smith basses with Smith TC Med. strings and get all the sound they need. They are on 1000s or recordings and the sound is with our Strings.

I see here that your bass doesn't have Smith Strings on it. That would be the best match for the sound here, the TCRM Med 5s.

[Tim Bishop]

Ken is right, I would also suggest setting this bass up with the Smith Medium Taper Cores. Those strings are truly the best fit for a Smith bass. Also, I would return the DIP Switch settings back to either the "Original" or "New" settings as was set from the factory.

What amplification set-up are you using?

BTW - I know that bass (use to be mine) and I know the tone is there. Set-up is everything!

[Joe Spina]

Originally Posted by Tim Bishop

Ken is right, I would also suggest setting this bass up with the Smith Medium Taper Cores. Those strings are truly the best fit for a Smith bass. Also, I would return the DIP Switch settings back to either the "Original" or "New" settings as was set from the factory.

What amplification set-up are you using?

BTW - I know that bass (use to be mine) and I know the tone is there. Set-up is everything!

OK then, lets set it up. What were the original dip settings. Right now I have it 1 on 2 off 3 on 4 off 5 on 6 off. Trim pot is at 50% or the same passive as active. Here my rig munus the (2) Avatar 2x10s. I also use the 6.0 shuttle with 2x10s. The strings on it are not Smith but still nickel taper core. What do you suggest.

[Tim Bishop]

The DIP Switch set-up you describe is the "New" setting. The "New" setting will give you a bit more Mid bite.

The "Original" DIP Switch set-up is as follows:

1 off ; 2 on
3 on ; 4 on
5 off ; 6 on

I run the Trim on my Smith Basses at about 75%. I also use Smith Medium Taper Cores and set the bass up to my playing style. Tried other quality strings but came back to the TCRM's.

[Joe Spina]

Originally Posted by Tim Bishop

The DIP Switch set-up you describe is the "New" setting. The "New" setting will give you a bit more Mid bite.

The "Original" DIP Switch set-up is as follows:

1 off ; 2 on
3 on ; 4 on
5 off ; 6 on

I run the Trim on my Smith Basses at about 75%. I also use Smith Medium Taper Cores and set the bass up to my playing style. Tried other quality strings but came back to the TCRM's.

Tried the settings you suggested. Subtle changes in tone were noticed. Tried some new strings and there was a more noticable difference. Put the trim at 60%, seemed to work out good there. This bass used to be yours? Why did you give it up? For its age it looks unplayed even though I'm probably the 3rd owner or so.

[Tim Bishop]

Originally Posted by Joe Spina

....This bass used to be yours? Why did you give it up?.....

Yes, that bass use to be mine. Why did I "give it up"? Good question, should've kept that one. I was approached with interest in that particular bass, so, I let it go. I have a back-up .

[Joe Spina]

Originally Posted by Tim Bishop

Yes, that bass use to be mine. Why did I "give it up"? Good question, should've kept that one. I was approached with interest in that particular bass, so, I let it go. I have a back-up .

Looks like whoever took it from you didnt play it much. Cant find a mark on it anywhere. At least you know where it is now and in good hands.

[Tim Bishop]

Originally Posted by Joe Spina

Dr hi-beams then Lo-beams, both worked pretty well.

Yeah, I've tried those strings as well; not a good fit for Smith Basses (IMO and to my ear). You really do need to try the Smith Medium Taper Cores (TCRM's). Once you do, you can then decide for yourself what works best for you.

[Tim Bishop]

Originally Posted by Tim Bishop

Yeah, I've tried those strings as well; not a good fit for Smith Basses (IMO and to my ear). You really do need to try the Smith Medium Taper Cores (TCRM's). Once you do, you can then decide for yourself what works best for you.

Oh, and BTW, if you do try the Smith TCRM's, because of the Taper Core design, you will need to re-set the action accordingly at the bridge. If you've played Taper Core strings, you know what I'm talking about. If not, you will.