Starting a DB Project

[Ruben E garcia]

Originally Posted by wayne holmes

Easy, big fellow, with that chisel! If you are going to chisel after you glue the cleats-you might want to put tape around the cleat in case (or inverted diamond shaped cakes of lipstick) don't want to damage the top-Ruben, if you ain't careful, this could be disaster coming down the road.

I guess it would be considered butchery to use a sander on the edges of the cleats before they are glued?


cleat-look I don't know, but looks like your hand is healing up good. How did you do that- the wounds look like about 2mm shy of the width of the chisel...

Hi Wayne I guess the traditional way is chisel out the Cleat after Gluing… I don’t think that sanding before gluing it’s a bad idea… for now I am sticking to what I have seem (don’t want to be very creative).. I am going to tape around the cleats for sure, don’t want to nick the top… to be honest I did make few nicks the first time

The hand its fine, it was a 10mm wound and it hit the bone.. Lots of blood and all that, I lost some tactile sensation on the skin of my finger, I got a none feeling in a good part of that finger right after the accident, like local local anesthesia feeling… I was tacking down the cleats and old hide glue from the top with the small chisel and guess what! my hand was on the way… and the chisel slipped….. Boom… work time was over

Now I am very careful and aware where my fingers are all the time…