Please Help with Smith Pickups!

[Hector Corrales Campos]

Originally Posted by Tim Bishop

Very odd. Sounds like whomever had the bass before you maybe messed it up. The magnets in those P/U's are very strong and, for example, if someone used steel wool on the frets and fretboard (i.e. to clean) and didn't cover the P/U's for protection from the steel wool particles, it's possible the P/U's are messed up as a result. Not sure what else it could be otherwise.

Maybe Tim, the bass are used but it`s in great condition, but probably the previous owner do someting wrong and messed up the pickups

I think i need to replace the pickps with new ones...

[Tim Bishop]

Originally Posted by Hector Corrales Campos

Maybe Tim, the bass are used but it`s in great condition, but probably the previous owner do someting wrong and messed up the pickups

I think i need to replace the pickps with new ones...

Or, before you spend money on new P/U's and as you referenced earlier, your "pro" set-up-tech can troubleshoot it for you and determine what you need to do. Just make certain you know your "pro" set-up tech knows what they are doing.

[Hector Corrales Campos]

Originally Posted by Tim Bishop

Or, before you spend money on new P/U's and as you referenced earlier, your "pro" set-up-tech can troubleshoot it for you and determine what you need to do. Just make certain you know your "pro" set-up tech knows what they are doing.

Thanx Tim, i will try to exhaust all options before buying a new set of Ken pickups, and get another technician to check my bass to have a different opinion

Thanx for your help Tim, the next days I'll notice if it might solve the problem or not

Best Regards

[Ronen Tat]

Hi Hector,
I would also check the G string saddle at the bridge. Check that the string sits in its place. Make sure there is optimal contact between saddle screws and bridge base.

[Bill Bernhard]

Is the problem there if you solo either pickup?

[Hector Corrales Campos]

Take it to another technician who readjusted the pole pieces and replace the input jack (barrel).

He told me that the problem was the adjustment of the pole pieces on G string!!! I´m very happy now with my BSR5M SOUNDS AWESOME!!!

But now the noise (hum) gets under both (passive and active) do not know if this can be corrected with a direct box with ground/lift switch.....

Someone else has had this problem (noise or hum)?

Best Regards

HECTOR

[Hajime Hirose]

Dear Hector,
I think it seems your shielding paint lost effect like new Smith basses. Most basses have no problem for very long time, but if your bass spent for long time with too much moisture or some other reasons, there is no enough effect of shielding.
Then if you have tester, I recommend you check resister of shielding effect, then if you find high number from tester, you need to re-shield. It is easy repair work. But if you have no experience, you need to bring it some skillful repair person who won't break electronics.
And I also recommend if bridge touches to the ground.

Hajime