Would you change a Smith?

[Mike Jenkins]

Originally Posted by Bob Faulkner

To expound on this, I wouldn't necessarily want a separate compartment as I've found them to generally involve lousy plastic covers or otherwise be prone to problems.. Also, the less wood carved out of the body of my bass, the happier I am..

To implement something like this I would say make a metal access door in the metal backplate over the battery with a slotted metal latch that can be actuated using a key or screw driver. You get the convenience factor with less risk of damage from minor abuse.

The plastic, spring loaded battery cover on my Dean was broken off by my guitar player when he went to put the bass on to mess around and accidentally bumped the battery compartment, causing the cover to pop open. It was then wrenched out of it's socket by his leg. That compartment was convenient, until a minor bump which is very likely to happen in normal use made a situation where the battery would fall out and dangle from the bass under normal use.. I eventually gave up and fixed it.

An accident can happen any time with anything. I've been fortunate enough not to experience any mishaps with the battery compartments on my basses. But whether or not the battery compartment is carved separately in the body or accessed through the back plate I for one wouldn’t want the battery compartment accessed with a key or screwdriver. That defeats the purpose of having the quick access compartment. Also, I'm not so sure that such a small hole in the back of the bass would make a noticeable difference in tone. Ken can speak to that one.

[Bob Faulkner]

well, a key or screw driver would be the easiest, but i'm basically talking about a rotating latch with a slot you would use something flat to turn.. in theory you could just use a finger nail..

[Mike Jenkins]

Originally Posted by Bob Faulkner

well, a key or screw driver would be the easiest, but i'm basically talking about a rotating latch with a slot you would use something flat to turn.. in theory you could just use a finger nail..

That could work

[Reyes Rodriguez]

I like everybody else on this forum like Ken Smith work but one thing I would change is the 2/3 gears on the 5 string models. I like the regular 3/2. No disrespect to Ken I just think the 3/2 looks better.

[Ronson Hall]

Originally Posted by firepower

I like everybody else on this forum like Ken Smith work but one thing I would change is the 2/3 gears on the 5 string models. I like the regular 3/2. No disrespect to Ken I just think the 3/2 looks better.

Aren't the 2/3 gears an option? They were when I ordered my Smitty!

[Tim Bishop]

I'll take it either way if Ken Builds it.

I do, however, prefer the 2/3 for this reason: With this set-up/configuration, I believe the string tension is better distributed across the Peg-head, Nut, Fingerboard to bridge, thus, providing a better balance (tension-wise) across the neck.

It's my opinion and I'm stickin to it.