Ken's Corner (Bass Forums Sponsored By KSB)

Go Back   Ken's Corner (Bass Forums Sponsored By KSB) > Electric Basses > Woods, Electronics, & Components

Reply
 
Thread Tools Display Modes
  #1  
Old 12-19-2017, 06:57 AM
ajhodge ajhodge is offline
Posting Member
 
Join Date: 11-28-2017
Location: Kingston Ontario Canada
Posts: 39
ajhodge is on a distinguished road
Default Caring for my bass

Hi there. I'm wondering what I can use to clean the neck of my bass. Sometimes when I'm playing I feel little "bits" gathering under my thumb...

I'd like to clean the neck off but I'm afraid to use something that might damage it. It's a 1987 BT6.

I have some Old English Lemon Oil (This stuff: http://www.oldenglishpolish.com/sf2_conditioning.shtml) ...

Tips? Tricks?

Also, wiping it down after playing? Just a J-Cloth enough?

Thanks.
Reply With Quote
  #2  
Old 12-19-2017, 11:28 AM
Ken Smith's Avatar
Ken Smith Ken Smith is offline
Bassist, Luthier & Admin
 
Join Date: 01-18-2007
Location: Perkasie, PA
Posts: 4,851
Ken Smith is on a distinguished road
Lightbulb

We make a polish for cleaning. If the finish is damaged from salty sweat, nothing can help but a full re-finish until that sand paper sweat does it again. If that is what you are asking.
Reply With Quote
  #3  
Old 12-19-2017, 03:47 PM
ajhodge ajhodge is offline
Posting Member
 
Join Date: 11-28-2017
Location: Kingston Ontario Canada
Posts: 39
ajhodge is on a distinguished road
Default

It's a 30 year old bass, but it's very new to me, so I guess the finish has been worn off on parts of the back of the neck.

It's not likely that I could get it to you for a full refinish. I'm in Canada, and with that rosewood fretboard, crossing the border is an issue

Would that Lemon Oil be a good thing to rub on the back of the neck? Also what about the rest of the body? Is there something in particular that I can use to clean it up?

I also asked about wiping it down after playing, and what you'd recommend as far as a cloth... would J-Cloth be OK for that or should I have a small cotton towel or something?

Thanks.
Reply With Quote
  #4  
Old 12-20-2017, 12:28 AM
Ken Smith's Avatar
Ken Smith Ken Smith is offline
Bassist, Luthier & Admin
 
Join Date: 01-18-2007
Location: Perkasie, PA
Posts: 4,851
Ken Smith is on a distinguished road
Exclamation ?? Rosewood??

Quote:
Originally Posted by ajhodge View Post
It's a 30 year old bass, but it's very new to me, so I guess the finish has been worn off on parts of the back of the neck.

It's not likely that I could get it to you for a full refinish. I'm in Canada, and with that rosewood fretboard, crossing the border is an issue

Would that Lemon Oil be a good thing to rub on the back of the neck? Also what about the rest of the body? Is there something in particular that I can use to clean it up?

I also asked about wiping it down after playing, and what you'd recommend as far as a cloth... would J-Cloth be OK for that or should I have a small cotton towel or something?

Thanks.
What Rosewood Fretboard? Show me the FINGERBOARD, and I will ID the wood for you. Rosewood is is NOT!

Also, cleaners do NOT replace worn away finish. They can only make things worse.
Reply With Quote
  #5  
Old 12-20-2017, 08:12 AM
ajhodge ajhodge is offline
Posting Member
 
Join Date: 11-28-2017
Location: Kingston Ontario Canada
Posts: 39
ajhodge is on a distinguished road
Default

This is the bass I now own: https://reverb.com/item/6407367-ken-...-6-string-bass

I thought the fret board was rosewood, but maybe not?

I'll have to grab one of your little polish and cleaning kits then. Maybe, based on the photo, you could tell me which of your cleaning/polishing products to get for the neck and the body.

Thanks. Let me know what that fingerboard is.

Last edited by ajhodge; 12-20-2017 at 08:48 AM.
Reply With Quote
  #6  
Old 12-20-2017, 02:41 PM
Ken Smith's Avatar
Ken Smith Ken Smith is offline
Bassist, Luthier & Admin
 
Join Date: 01-18-2007
Location: Perkasie, PA
Posts: 4,851
Ken Smith is on a distinguished road
Lightbulb

Macassar Ebony FB

Lacquer finish but not thickly applied.

Use the Pro Polish on the Lacquer and not on the worn thru areas.

Use the Wax Polish for the Fingerboard.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:51 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2007 - Ken Smith Basses, LTD. (All Rights Reserved)