A '90 Ken Smith BT6G

[JonPaulsen]

I'm considering buying a koa BT6G from a pro in LA. It's for a two band eq, and I guess a varnish finish. Marado fingerboard?
I see the back of the neck is a bit worn through the finish, but I guess that's just part of the mojo.

Just wondering if there are any special issues with these early 6 strings or if they are safe purchases. I'm not thinking of the woodwork so much, mostly worried about the electronics and whether the neck is stable in my "all over the place climate", dry and cold/electrically heated in winter and extremely humid in summer.

I'm very tempted cause I've only heard good things about those old Ken Smith basses. But it's a lot of money, so just gathering a little piece of extra information to ease my mind before spending the money

Thanks!

Jon (from Norway)

[JonPaulsen]

hehe

Can't wait to get it!

[Ken Smith]

I missed this post last month, sorry. The old BTs are good working basses, worldwide. Same work as we do now. Finish was probably a lacquer of sort but hot high gloss and not thick. We made the 2-band from about 1986-1993. In late 1992 we came out with the same circuit in a 4-knob unit but with an added mid-range plug-in as well, the 4/5 BT/BMT unit. In 2004 we came out with the modified version with 18v usage, same power drain but longer lasting. For Smith basses with the older BMT model circuits out there with S/P switches thru the top, we can Mod these 18s to work as a 9v like before as there is no room for the 2nd battery without moving one of the switches which is a big job.

[JonPaulsen]

I haven't received it yet, but I'm really anxious to get it. Hopefully it'll be on its way over here sometime during the week. I won't bother doing anything with the electronics as long as it works. Really curious to play it for the first time!

To me they have always been intriguing instruments, I started playing in the early 80s and saw the BT6 in the hands of John Patitucci and others. I remember drooling over these basses in Bass Player Magazine... It had to be a BT for me, even though I was considering a MD7 locally in Norway, too... That's what a Ken Smith bass should look like according to my sentimental brain :-)

What is the recommended way to deal with the spots where the finish is worn, though? Linseed oil once in a while?

Thanks for your time, Ken, I appreciate you're taking the time to answer me!

JI

[Ken Smith]

Originally Posted by JonPaulsen

What is the recommended way to deal with the spots where the finish is worn, though? Linseed oil once in a while?
JI

On the Finish, if it is a lacquer, the only fix is a re-finish. To just slow down the wear, a tung oil might work, something that hardens fast on raw wood.

[JonPaulsen]

Originally Posted by Ken Smith

On the Finish, if it is a lacquer, the only fix is a re-finish. To just slow down the wear, a tung oil might work, something that hardens fast on raw wood.

Thanks, I will look into it when I get it in hand.
I'm not sure how to tell a thin not gloss lacquer from a varnish or oil finish, but is this something you can tell from the serial number?
I do have something called Liberon Finishing Oil that I'm planning to finish a swamp ash body with... It's this suitable?

http://www.amazon.co.uk/Liberon-0038.../dp/B000TAWCIE

BTW, the preamp is the stacked knob two band preamp, and there isn't S/P switches on it.

Thanks again,
JI