#1
|
|||
|
|||
How to breathe new life into my old Ken Smith??
Hi!
I bought Ken Smith #041 about 13 years ago on West 48th st in NY and she was well used at that point in time. Add 13 years- 4 of which she got played constantly on stage in a catskills cover band upstate, and many years of unfortunate neglect in the original hard shell case from after I got married. Her current condition is fair (electronics poor)- desparately in need of a refinish, fret job, and possibly the pickups need to be rewound. The preamp is kinda shot- dirty pots that cut out and a jack that needs replacement. The preamp is a sealed one piece unit i think with the initials HAZ (its been a while since i had the backplate off). The pickups are blade humbuckers with WOOD casments (rosewood i think) that make this almost one of a kind instrument. All told it still sings like a queen- this bass is a slappers delight! It would be nice if i could get her back into full professional condition, but to trust a different luthier might be disasterous- any ideas would be apprieciated! |
#2
|
||||
|
||||
Send it to Ken.
Quote:
__________________
Tim Bishop |
#3
|
||||
|
||||
What Tim said, really. No one else could really do it justice, and Ken might like getting an old beast like that back in his hands for a bit..
__________________
Proud original owner of a 2001 Ken Smith BSR4EG lined fretless. My band's site: Delusional Mind |
#4
|
||||
|
||||
he preamp is a sealed one piece unit??
Quote:
As mentioned here, we do restore Smith Basses but we have to have it here to make any judgments or estimates. Those pickups were made ages ago before we had our own. It would be best to re-route the Bass and put the new ones in IF that have gone bad. The Blade models were made for us by Bill Lawrence from 1979-1982, period. Each batch was slightly different and in 1982 we developed our own Pickup which we still use today, the Soapbar with pole pieces. |
#5
|
|||
|
|||
sorry i stand corrected!
you are right, Ken its not a "sealed unit" thats just what some repairman told me who did not want the headache.
I took the backplate off this morning and what i see is a circuitboard and parts and wires- no sealed unit. Pickups still have some zing, getting a little tired maybe but not dead. I'm gonna talk to my wife (da boss) and negotiate getting the bass sent for an estimate. all together, the pots crackle some and have some dead spots, and the series/paralell switch closest to the jack only works in the up position. Ken I'll send another message requesting the shipping details as soon as I think I can avoid an argument over budgeting at home, thanks! Dave |
#6
|
||||
|
||||
series/paralell switch closest to the jack only works in the up position?
Quote:
You have this Bass for 13 years and didn't know what the controls did? I hope you do better with your driving... |
#7
|
|||
|
|||
I hope so too, as I own a small cab company...
they say ignorance is bliss!! I must be mighty blissfull. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|