#1
|
||||
|
||||
Burner pickup wiring question
Hi all, Just recently I got a nice 96' Deluxe Ash KS Burner 4 that came with alien pickups & preamp. I do have the original KS preamp and also found a pair of used original KS Burner pickups. The bass is going back to its original setup and I need some help understanding which wire goes where: Each pickup has four wires (red/green/black/gray) and a bare wire. The p/u connectors on the preamp have only two wires (black/white). Also, both pickups are the same size and look identical. How do I know which goes to bridge/neck position? Thanks! Ronen ------------------------------------------------------------------------------------------------------------- "From Ken; Pickups are the same, either position for each. bare goes with ground/shield. Wt/bk to wt/bk ( I think), the other two are tied off.. I think.. This is over a decade since." Last edited by Ken Smith; 04-25-2012 at 04:40 PM. Reason: Quick Reply.. |
#2
|
||||
|
||||
Quote:
Anyway, thanks for the information. I already installed the original preamp and the sound has significantly improved! No idea why anyone would want anything else in there. The pickups are next. |
#3
|
||||
|
||||
Quote:
|
#4
|
||||
|
||||
Thanks again Ken.
Apparently, (wires) from the pickup => black + bare goes to black, green goes to white, red & white from pickup tide together. All is done. The bass is now a legit Ken Smith Burner with that thick horn-style tone AND ultra fast neck. I love it! |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|