Ken's Corner (Bass Forums Sponsored By KSB)

Go Back   Ken's Corner (Bass Forums Sponsored By KSB) > Double Basses > Luthier's Corner

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 10-16-2014, 10:23 PM
Ron Bedard Ron Bedard is offline
Junior Posting Member
 
Join Date: 10-16-2014
Location: Seacoast NH
Posts: 2
Ron Bedard is on a distinguished road
Default Light tension strings

Hello, and thanks for the opportunity to ask for a bit of advice.
I build ukuleles, and have acquired a plywood bass that I'm repairing as a nephew's Christmas present. He's 16 and plays bass guitar in a high school jazz combo.
The instrument I've got only had a few minor plywood delaminations out at the corners, and two spots where the plywood seam at the ribs opened up. I've reglued these areas with thinned Titebond and HHG respectively. Also, the saddle glue joint had let go and allowed the saddle to rock up toward the bridge. That problem has also been addressed.
Here's my question. (finally)
There's a slight separation between the neck heel and the button. There's less than enough room to slide an x-acto blade into the joint. The strings were at full tension when I bought the instrument, and the joint doesn't seem to change with tension changes. I don't think the neck is loose enough to warrant immediate attention. Am I mistaken? Seems like the glue joints at the long sides of the neck mortise are still good.
I'm hoping to select some strings that are appropriate for a brand new player with bass guitar experience. The other selection criteria is that they have the lightest tension possible. I'd like to see whether he'll stick with the instrument before I tackle a re-glue of the neck.
Thanks, Ron
Reply With Quote
 


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 06:17 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2007 - Ken Smith Basses, LTD. (All Rights Reserved)