Help with my String/Bridge Height

[Ken Smith]

Originally Posted by Calvin Marks

Same bass. It came with these string heights from the maker. I also put in about 2 years of research as to what I exactly wanted, and I got that, apart from the fingerboard camber issues. I'm honestly just looking for advice. You guys are used to playing great basses, so all I want are answers.

Playing even a Plywood bass, it must be set-up correctly. Bad set-up is just that, bad unplayable set-up. Even a 100k bass can have a bad set-up.

If you want answers and demand them to guide you perfectly, HIRE a Bass set-up consultant. Short of that, you are stuck with the answers given on the Forums. Sorry!

[Calvin Marks]

Originally Posted by Ken Smith

Playing even a Plywood bass, it must be set-up correctly. Bad set-up is just that, bad unplayable set-up. Even a 100k bass can have a bad set-up.

If you want answers and demand them to guide you perfectly, HIRE a Bass set-up consultant. Short of that, you are stuck with the answers given on the Forums. Sorry!

Ken, what's with the hostility?

I don't demand anything. I share my experiences and hope that someone like yourself or Arnold will shine some light onto this scenario as you both have experience with bass set-ups.

I don't know of any "set-up consultants", at least in my area. Perhaps the best solution is to pack my bass up and drive south of the border and get it set-up properly once and for all.

[Drake Chan]

Originally Posted by Calvin Marks

Ken, what's with the hostility?

I don't demand anything. I share my experiences and hope that someone like yourself or Arnold will shine some light onto this scenario as you both have experience with bass set-ups.

I don't know of any "set-up consultants", at least in my area. Perhaps the best solution is to pack my bass up and drive south of the border and get it set-up properly once and for all.

I didn't see any hostility in Ken's post(s), although he did write "suck" as a typo for "stuck" (I hope! ).

And I think you answered your own question. The forums can only answer so much, IMO.

[Ken Smith]

Originally Posted by Drake Chan

I didn't see any hostility in Ken's post(s), although he did write "suck" as a typo for "stuck" (I hope! ).

And I think you answered your own question. The forums can only answer so much, IMO.

Yes, Typo.. 'sTuck' was the word.. sorry.. Thanks for pointing that out..

[Calvin Marks]

http://www.performances.org/press/08...arMeyer-01.jpg

[Ken Smith]

Originally Posted by Calvin Marks

Ken, what's with the hostility?

I don't demand anything. I share my experiences and hope that someone like yourself or Arnold will shine some light onto this scenario as you both have experience with bass set-ups.

I don't know of any "set-up consultants", at least in my area. Perhaps the best solution is to pack my bass up and drive south of the border and get it set-up properly once and for all.

I was just responding to your statement;

You guys are used to playing great basses, so all I want are answers.

I have you a huge first reply with all the details in a set-up and Arnold agreed 'what I said'. There is nothing more I can ad to it without having the bass in my hands if there is even more to say.

[Calvin Marks]

Doesn't Edgar Meyer and Jeff Bradetich play with super low action? Probably much lower than 4mm on the G.

[Ken Smith]

Originally Posted by Calvin Marks

Doesn't Edgar Meyer and Jeff Bradetich play with super low action? Probably much lower than 4mm on the G.

I don't know what they use but they play the bass the play with the action the use. Is that the string height they would use in your shoes looking for a job in an Orchestra or did it take years to get to that and an instrument and set-up to match?

I can't answer you on that. Jeff and I were staying at the same hotel last week at the ISB by chance. Maybe had you asked me 2 weeks ago, I could of asked him one morning at breakfast!

[Arnold Schnitzer]

Calvin, it's important that the fingerboard arch be set properly before the bridge curvature can be worked out. If the fingerboard is too flat (cross-ways) the outside strings will have to be low or you won't be able to bow the bass. If you are going to use 25mm spacing at the bridge, which is quite narrow (27-28 is "normal"), the fingerboard will need to be more arched than usual. I hope this is clear and helpful...

[Calvin Marks]

Originally Posted by Arnold Schnitzer

Calvin, it's important that the fingerboard arch be set properly before the bridge curvature can be worked out. If the fingerboard is too flat (cross-ways) the outside strings will have to be low or you won't be able to bow the bass. If you are going to use 25mm spacing at the bridge, which is quite narrow (27-28 is "normal"), the fingerboard will need to be more arched than usual. I hope this is clear and helpful...

Thank you for the reply. Very clear, very helpful. The bass came with 25mm, and it bows fine, so I'll leave it that way. Seems that I need the fingerboard plained properly and then the bridge set-up in accordance with 4,5,6,7or8.