Installing Soaps on a Burner?

[Ken Smith]

Originally Posted by Tom Albano

Recently bought my 2nd Smith Bass, A Burner (Solid Ash, 5 string), Although this one is Really "Smithish" as it came with an Aguilar OBP-3 with 2 bands of mid. its an 18 volt system and the bass sounds very nice actually, the install is clean the cavity fit both batteries quite nicely although a bit tight.... Anyway

Was thinking about buying a set of soapbars and having the bass routed as well as a new Smith pre.

My question .... Would the soapbars work out OK with the tighter 16mm spacing?

- T

Only the Flat Tops will work. The Burner has a much narrower neck and bridge spacing. The pickups made for the 18mm model Smith basses will not line up between the poles and the strings. Also, routing that finish may be tricky. If you want a full Smith sound, get a full Smith bass, The Burner is the Burner.

[Tom Albano]

Originally Posted by Ken Smith

Only the Flat Tops will work. The Burner has a much narrower neck and bridge spacing. The pickups made for the 18mm model Smith basses will not line up between the poles and the strings. Also, routing that finish may be tricky. If you want a full Smith sound, get a full Smith bass, The Burner is the Burner.

Thanks Ken, I appreciate you posting, I just wanted to inquire... Maybe Ill grab a "P.A.P.A" one day soon.
Happy New Year
-T