Is it only me...

[Tim Bishop]

Originally Posted by Jens Westerinen

Straight...

Is it possible, given the straight 1/4 plug-end, that your output-jack is taking some hits while plugged in? Given the placement of the output-jack on the bass, you really need to be extra careful when using the straight 1/4 plugs into the output-jack. With the angled plug-end you reduce the impact to the output-jack in the event you sit the bass down while plugged in or whatever other impact may occur to that area of the bass while plugged in. Make sense?

[Ken Smith]

All Jacks have an inner spring to hold the Plug. Top mount Jacks can be squeezed back as needed but barrel Jacks like these cannot. Some Cables on the Market with slightly over-sized tips or plugs can, will and do prematurely strip the strength of these springs. The Jacks/Cables that have been reported to have 'killed' the most Jacks in the last 20 years are those made by Monster. They are aware of this and use a type 2 on the cables that kill them. The regular sized type 1 is not as damaging. Jacks lasting 10 years or so are evident by this. Jacks lasting weeks or months tell a different story.

[Jens Westerinen]

Originally Posted by Ken Smith

All Jacks have an inner spring to hold the Plug. Top mount Jacks can be squeezed back as needed but barrel Jacks like these cannot. Some Cables on the Market with slightly over-sized tips or plugs can, will and do prematurely strip the strength of these springs. The Jacks/Cables that have been reported to have 'killed' the most Jacks in the last 20 years are those made by Monster. They are aware of this and use a type 2 on the cables that kill them. The regular sized type 1 is not as damaging. Jacks lasting 10 years or so are evident by this. Jacks lasting weeks or months tell a different story.

So you think i might have been using over sized plugs that can hade led do this?

[Ken Smith]

Originally Posted by Jens Westerinen

So you think i might have been using over sized plugs that can hade led do this?

Not you, the cable maker. The difference can be .002" difference.

[Jens Westerinen]

Originally Posted by Ken Smith

Not you, the cable maker. The difference can be .002" difference.

Ofcourse. So I would need to find another over sized cable or just change the jack.

[Tim Bishop]

Originally Posted by Jens Westerinen

Ofcourse. So I would need to find another over sized cable or just change the jack.

No, not "over-sized" cable, but one that fits that barrel-jack better for you. Have you tried the George L's?

[Jens Westerinen]

Originally Posted by Tim Bishop

No, not "over-sized" cable, but one that fits that barrel-jack better for you. Have you tried the George L's?

Ok, no.
Will try to find one that does before I start change the jacks.

[Tim Bishop]

Originally Posted by Jens Westerinen

So you think i might have been using over sized plugs that can hade led do this?

The problem may be determining what "type" you have (oversized or not).

[Tim Bishop]

Originally Posted by Jens Westerinen

So you think i might have been using over sized plugs that can hade led do this?

I've heard others here on the Forum recommending George L's as a solution to this issue.

[Jens Westerinen]

Originally Posted by Tim Bishop

Is it possible, given the straight 1/4 plug-end, that your output-jack is taking some hits while plugged in? Given the placement of the output-jack on the bass, you really need to be extra careful when using the straight 1/4 plugs into the output-jack. With the angled plug-end you reduce the impact to the output-jack in the event you sit the bass down while plugged in or whatever other impact may occur to that area of the bass while plugged in. Make sense?

I've always used straight plugs and I'm not any more abusive to my Smith then any other of my basses.

It makes total sense what you're saying and I have thought about getting angeled plugs but haven't had this problem before so just haven't.

[Tim Bishop]

Originally Posted by Jens Westerinen

I've always used straight plugs and I'm not any more abusive to my Smith then any other of my basses...

It doesn't have to be "abuse". It only takes stepping on the cord while pulling away at an angle that can apply additional stress to the output-jack.

[Jens Westerinen]

Originally Posted by Tim Bishop

It doesn't have to be "abuse". It only takes stepping on the cord while pulling away at an angle that can apply additional stress to the output-jack.

Yes, but I don't step any more on the cord while palying a Smith then any other basses.

[Tim Bishop]

Originally Posted by Jens Westerinen

Yes, but I don't step any more on the cord while palying a Smith then any other basses.

That's my point exactly.

[Tim Bishop]

Originally Posted by Jens Westerinen

....It makes total sense what you're saying and I have thought about getting angeled plugs but haven't had this problem before so just haven't.

I'm only suggesting angled plugs as a possible solution and to illustrate how the angled plug could mitigate damaging these output-jacks. I also use straight 1/4's but again, I am very careful and over-aware of my surroundings and that potential "hit" that might occur to the plug at the output-jack. I'll even go as far as to unplug the cable from my bass until I am ready to play. Plus, this also helps extend battery life. : )

[Jens Westerinen]

Originally Posted by Tim Bishop

I'm only suggesting angled plugs as a possible solution and to illustrate how the angled plug could mitigate damaging these output-jacks. I also use straight 1/4's but again, I am very careful and over-aware of my surroundings and that potential "hit" that might occur to the plug at the output-jack. I'll even go as far as to unplug the cable from my bass until I am ready to play. Plus, this also helps extend battery life. : )

Sounds alot like me. I'm very careful too.
Just wanted to hear if any body else also have noticed this compared to other brands but it seems like my basses has been exposed to something any how. Not just the jack that tends to wear out fast.

[Tim Bishop]

Originally Posted by Jens Westerinen

....seems like my basses has been exposed to something any how....

Well, if you bought them used, no tellin what type of history is behind them. Is it possible the issues you have were inherited?

[Tim Bishop]

Originally Posted by Jens Westerinen

....Just wanted to hear if any body else also have noticed this compared to other brands but it seems like my basses has been exposed to something any how. Not just the jack that tends to wear out fast.

What else has "worn out"???

[Jens Westerinen]

Originally Posted by Tim Bishop

What else has "worn out"???

I ment that they has been exposed to something and that it's not just the jack that has worn out by it self. Sorry for my english. Think i built the sentences as I would in swedish. May get another allusion in english when that's been done.