History of the American Bass

[Nando Raio]

Here is a few pictures of my 1880's George E.Bryant Bass....Yankee's Bass!
George's great great grand daughter sent me 2 pictures of him at his shop, I thought would be cool to post them,

[Ken Smith]

Originally Posted by Nando Raio

Here is a few pictures of my 1880's George E.Bryant Bass....Yankee's Bass!
George's great great grand daughter sent me 2 pictures of him at his shop, I thought would be cool to post them,

The pictures of that bass reveal a turning point in Yankee Bass making. This bass is a few decades after the arrival or the old Gemunder Brothers. They came separately a few years apart and from different countries as George was working in France with Vuillaume and August came from Germany, his homeland. They later both moved to New York, again separately but the next generation of Gemunder's collaborated as well.

The reason I mention them as seeing a Cello-like shouldered Violin Cornered roundback shows a much higher art of bass making than seen in the Prescott Era. Also, many of the Boston school makers were European trained Violin makers. George Gemunder made 2 Vuillaume model basses shortly after arriving in New England. August made a pair of Gamba roundbacks (one of which I own) and at least one roundback smaller gamba shaped bass. In NY, the son's turned to importing basses from Germany and concentrated mainly on Violins.

This Bass reminds me more of Gemunder influence rather than Prescott with the exception of the tuner plates which again, look beautiful. Enjoy it..

[Nando Raio]

Thanks Ken for the info. I don't really know anything about August and Gemunder, were they Bryant's as well?
I talked to the great great granddaughter and she traced her family back to the 1700's in England, very interesting, George Bryant passed away in 1916.
This bass sounds more like an Italian bass than anything else, the back is really alive, you can feel it on every note, its really easy to play even with the string String length been over 42
Upper Bouts 20 inches
Middle Bouts 14 inches
Lower Bouts 25.9 inches

Large 3/4 or a small 7/8?

[Ken Smith]

Originally Posted by Nando Raio

Thanks Ken for the info. I don't really know anything about August and Gemunder, were they Bryant's as well?
I talked to the great great granddaughter and she traced her family back to the 1700's in England, very interesting, George Bryant passed away in 1916.
This bass sounds more like an Italian bass than anything else, the back is really alive, you can feel it on every note, its really easy to play even with the string String length been over 42
Upper Bouts 20 inches
Middle Bouts 14 inches
Lower Bouts 25.9 inches

Large 3/4 or a small 7/8?

Actually it is August Gemunder Snr. and George Gemunder Snr.. They were two makers that mover to Mass. about 1846 and 1848. George came from France where he was working and August from Germany. Both originally trained by their father in Germany. Your Bass reminds me of their work in some ways.

[Brian Glassman]

Beautiful bass! Thanks for the interesting post.

[Nando Raio]

Robin just posted some interesting newspaper articles on George E. Bryant, check out this link, scroll down to see it, part of AMERICAN HISTORY
http://thehofmannandbryantfamilyhistory.blogspot.com/

[Brian Glassman]

Nando, Much earlier in this thread Ken has said that the scroll on my Prescott Gamba may not be original because it is not typical of a Prescott scroll. However it does appear to be very old and although the brass cheek plates are wider than on most Prescotts it does have the typical Prescott-like Bee Sting shape at the top which are on your Bryant as well.
In fact it looks much like the brass cheek plates on your Bryant! Tuners looks similar as well.

Perhaps it's a Bryant scroll? What do you think Ken?

The back of the two scrolls are not as similar, however. I'll have to post a pic of the back of the scroll to compare.