[quote=Matthew Tucker;21282]Usually once I take the top or back off, I keep the corners and blocks into position with a sheet of 4mm plywood. Cheap and simple. A small screw through the ply into the face of each block holds everything in position until i'm ready to replace.
Jointing a back with a bend or curve in it, is tricky. You can't just line them up on a tabletop. I note Arnold's temp block method which I 'll have to try. Last one I did, I built a pair of cradles to which I tack-glued the back pieces. This allowed me to align them on a flat surface, plane the edges and clamp the insert simply and accurately.
Nice work !!! Thanks for the pics
PS-is Warne really making a comeback ?
12-16-2010, 02:21 AM
Threaded Mode