Starting a DB Project

[Ruben E garcia]

Originally Posted by Arnold Schnitzer

Consider also that lining up straight-edged cleats along a grain line can create a new fault line, resulting in a crack the next time the instrument is under excessive stress. Most current luthiers use diamond-shaped cleats because there is less strength at the grain line. Also, I believe yours are too far apart. Good on you for taking the criticism with an open mind and heart.

I have no idea that This particular type a cleats can cause later on some problems.... I am using Chuck book and he present few options and I just when for this one, that it happens to be his style... my cleats are spacing about tree inches apart but there is one 3 and 3/4, he also said that Bill merchant think that 2" and even 3" spacing is over kill. that cleats should be 4 to 6 inches apart.... now if I may ask you. what would be the optimum space between cleats.... lets say that I do Diamond cleats of 5/8" x 1"...

Thank for looking out after me... its hard but it need to be done the right way... and its a good experience... I just need to take a deep breath and take off all my beautiful cleats