BSR B Circuit

[Ken Smith]

Originally Posted by Greg Lorisco

So the 9V BMT circuit has the DIP switches as well?

And it should fit with drilling another hole for the mid pot/board?

Right?

Also, what frequencies are available for the mid DIP switches? 200hz to 800hz?

So the 9V BMT circuit has the DIP switches as well? .. NO, I showed a picture of it and the DIP is ONLY on the 18v model, sorry!

And it should fit with drilling another hole for the mid pot/board? Right? .. For the 9v unit only. The 18v unit probably will not fit.

Also, what frequencies are available for the mid DIP switches? 200hz to 800hz? .. I don't remember exactly as it's been almost 10 years since I chose the frequencies. The Mid boosts and Cuts. I don't think is goes down to 200, that's more of a Bass frequency. It probably starts a bit higher and ends maybe 700-900 but I would have to go back and look up all the notes. I go by sound, not by numbers when I choose a sound, sorry. Regardless, you probably can't put this circuit in your bass any way without major surgery. The 18v model circuit is standard on all regular hand-made Smith USA basses since about 2004.