Ken's Corner (Bass Forums Sponsored By KSB)

Go Back   Ken's Corner (Bass Forums Sponsored By KSB) > Electric Basses > Woods, Electronics, & Components

Reply
 
Thread Tools Display Modes
  #1  
Old 07-24-2007, 06:48 PM
Amit Shtriker's Avatar
Amit Shtriker Amit Shtriker is offline
Junior Posting Member
 
Join Date: 07-05-2007
Location: Israel
Posts: 26
Amit Shtriker is on a distinguished road
Default Thanks Tim

Everything is great now.. I turned up the gain and now I got a really healthy signal out of my bass, and the passive level is very low compared to the active in flat EQ. I also got my bass set up by a professional and it plays well. The only thing I'm not sure about is the Smith Taper Core strings (didn't want to move over and write again in the strings thread, sorry). They sound great and crisp out of the package, but I have a really big issue with them not being smooth enough for me (I were used to the Elixir coated ones), I feel a little bit uninspired because my playing involves a fair amount of smooth slides, and the strings kind of not letting me feel free moving across the neck. The guitar tech let me try some kind of string lubricant, and it felt better at that moment, but I don't know if I want to rely on lube all the time.. Do you use anything to keep your strings smooth or is it just me and you feel these strings are smooth enough? Maybe I just need to get used to them because they really sound good on my bass.. And I hope they will not go dead too fast
Reply With Quote
  #2  
Old 07-24-2007, 07:17 PM
Tim Bishop's Avatar
Tim Bishop Tim Bishop is offline
Senior Posting Member
 
Join Date: 02-25-2007
Location: U.S.A.
Posts: 1,274
Tim Bishop is on a distinguished road
Cool Smooth

Quote:
Originally Posted by Amit Shtriker View Post
Everything is great now.. I turned up the gain and now I got a really healthy signal out of my bass, and the passive level is very low compared to the active in flat EQ. I also got my bass set up by a professional and it plays well. The only thing I'm not sure about is the Smith Taper Core strings (didn't want to move over and write again in the strings thread, sorry). They sound great and crisp out of the package, but I have a really big issue with them not being smooth enough for me (I were used to the Elixir coated ones), I feel a little bit uninspired because my playing involves a fair amount of smooth slides, and the strings kind of not letting me feel free moving across the neck. The guitar tech let me try some kind of string lubricant, and it felt better at that moment, but I don't know if I want to rely on lube all the time.. Do you use anything to keep your strings smooth or is it just me and you feel these strings are smooth enough? Maybe I just need to get used to them because they really sound good on my bass.. And I hope they will not go dead too fast
Amit, give it some time, break them in and then see what you think. I would not have recommended putting lubricant on the strings as that will just contribute to the strings going dead quicker.

I'm not surprised the new strings sound really good on your bass. That's why I recommended them. I can't imagine using Elixir's, nickels, or any type of coated bass string. To me these types of strings just sound dead.....but that's just me, however, I suspect you would agree now that you've played both?

I have no issue with slides using Medium Taper Cores (steels). It's all about feel and touch. I think as you get use to them you'll be ok. Let me know after you've gone through a set or two.

I'm glad your happy with your set-up.
__________________
Tim Bishop

Reply With Quote
  #3  
Old 07-25-2007, 11:43 AM
Bob Faulkner's Avatar
Bob Faulkner Bob Faulkner is offline
Senior Posting Member
 
Join Date: 01-22-2007
Location: Atlanta
Posts: 282
Bob Faulkner is on a distinguished road
Default

Have you tried the compressors? They're a lot easier to slide on and still retain a good zing.
__________________
Proud original owner of a 2001 Ken Smith BSR4EG lined fretless.

My band's site:
Delusional Mind
Reply With Quote
  #4  
Old 07-25-2007, 12:01 PM
Amit Shtriker's Avatar
Amit Shtriker Amit Shtriker is offline
Junior Posting Member
 
Join Date: 07-05-2007
Location: Israel
Posts: 26
Amit Shtriker is on a distinguished road
Default The Compressors

Haven't tried them yet, Bob I think I can't find them in my location.. But I will try them in my trip to U.S in a couple of months Do you know where can I find them? I think that the big music stores don't have them..
These are regular strings without the taper core right? I guess I'll have to set up the bass again for them
Reply With Quote
  #5  
Old 07-25-2007, 05:08 PM
Bob Faulkner's Avatar
Bob Faulkner Bob Faulkner is offline
Senior Posting Member
 
Join Date: 01-22-2007
Location: Atlanta
Posts: 282
Bob Faulkner is on a distinguished road
Default

Quote:
Originally Posted by Amit Shtriker View Post
Haven't tried them yet, Bob I think I can't find them in my location.. But I will try them in my trip to U.S in a couple of months Do you know where can I find them? I think that the big music stores don't have them..
These are regular strings without the taper core right? I guess I'll have to set up the bass again for them

I order them direct from Ken. They aren't taper core, though I wish they would make taper core compressors. In truth I found my Smith accepted them just fine without needing any adjustments.
__________________
Proud original owner of a 2001 Ken Smith BSR4EG lined fretless.

My band's site:
Delusional Mind
Reply With Quote
  #6  
Old 07-25-2007, 06:27 PM
Tim Bishop's Avatar
Tim Bishop Tim Bishop is offline
Senior Posting Member
 
Join Date: 02-25-2007
Location: U.S.A.
Posts: 1,274
Tim Bishop is on a distinguished road
Cool Adjustments...

Quote:
Originally Posted by Amit Shtriker View Post
Haven't tried them yet, Bob I think I can't find them in my location.. But I will try them in my trip to U.S in a couple of months Do you know where can I find them? I think that the big music stores don't have them..
These are regular strings without the taper core right? I guess I'll have to set up the bass again for them
Quote:
Originally Posted by Bob Faulkner View Post
I order them direct from Ken. They aren't taper core, though I wish they would make taper core compressors. In truth I found my Smith accepted them just fine without needing any adjustments.
Amit, if you do decide to change strings from Taper Cores to something other than Taper Cores and depending on how good your set-up was, you most likely will need to complete another set-up and what a complete waste of your money that will be: Again, I would recommend you give the Taper Cores some time to adjust to your playing since you are not use to them. Otherwise, good luck!
__________________
Tim Bishop


Last edited by Tim Bishop; 08-01-2007 at 08:53 PM.
Reply With Quote
  #7  
Old 08-08-2007, 06:48 PM
Dennis Michaels's Avatar
Dennis Michaels Dennis Michaels is offline
Posting Member
 
Join Date: 06-20-2007
Location: Wilmington De
Posts: 72
Dennis Michaels is on a distinguished road
Default

Quote:
Originally Posted by Tim Bishop View Post
Amit, if you do decide to change strings from Taper Cores to something other than Taper Cores and depending on how good your set-up was, you most likely will need to complete another set-up and what a complete waste of your money that will be: Again, I would recommend you give the Taper Cores some time to adjust to your playing since you are not use to them. Otherwise, good luck!

I agree with Tim.
__________________
Dennis Michaels
www.myspace.com/dennismichaelsbass
www.dennismichaels.com
www.kensmithbasses.com
www.eden-electronics.com

Tone matters so play the best through the best.
Reply With Quote
  #8  
Old 08-08-2007, 10:09 PM
Tim Bishop's Avatar
Tim Bishop Tim Bishop is offline
Senior Posting Member
 
Join Date: 02-25-2007
Location: U.S.A.
Posts: 1,274
Tim Bishop is on a distinguished road
Cool Thx!

Quote:
Originally Posted by Dennis Michaels View Post
I agree with Tim.
Thx Dennis......can always use the additional ammo.
__________________
Tim Bishop

Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 12:49 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright © 2007 - Ken Smith Basses, LTD. (All Rights Reserved)