Amp volume question

[Tim Bishop]

Originally Posted by Don Edge

That is what I thought. I will stay with the 8 ohm. I really need to go somewhere and play this thing so I can hear it. I need to take a trip. The wife gave me the ok for the head and one cab. That is a good start. Thanks for the help, advice and sharing. It took a good part of your day. Thanks to you, also, Dave. It will be interesting to hear what my bass sounds like through this.

Don

Not a problem and your welcome. Keep us posted. And yes, take your bass (with fresh strings) with you when you try out that set-up. I think you will be impressed.

[Tim Bishop]

Originally Posted by Don Edge

That is what I thought. I will stay with the 8 ohm. I really need to go somewhere and play this thing so I can hear it. I need to take a trip. The wife gave me the ok for the head and one cab. That is a good start. Thanks for the help, advice and sharing. It took a good part of your day. Thanks to you, also, Dave. It will be interesting to hear what my bass sounds like through this.

Don

One more thing about the 4 ohm cabinets. I'm not knocking them; they serve a purpose and are fine. I'm just ensuring you know that you do recognize better coverage potential sticking with the 8 ohm cabs.

For example:

4 - 8 ohm cabs: 2 ohm load on amp.
2 - 8 ohm cabs: 4 ohm load on amp.
2 - 4 ohm cabs: 2 ohm load on amp.

There are other variations of the above set-ups, however, just make certain you know what your amp can handle. You don't want to burn an amp up by using the wrong speaker configuration. And, obviously, the room size, with or without FOH support, will determine which set-up will best meet your needs in the end.

Again, either the WT-405 or WT-550 will handle a load down to 2 ohms with no problem.

[Don Edge]

Found a store doing closeouts. Trying to make a deal now.

[Tim Bishop]

Originally Posted by Don Edge

Found a store doing closeouts. Trying to make a deal now.

Great! Let us know what you decide to go with or if you have any other questions.

[Don Edge]

Is $1600 for the WT-405 and 210XST and good price. The WT-405 I found out is a display. They have two and both are displays, not new in-box. Should I jump on this?

[Tim Bishop]

Originally Posted by Don Edge

Is $1600 for the WT-405 and 210XST and good price. The WT-405 I found out is a display. They have two and both are displays, not new in-box. Should I jump on this?

Well, it's not a great price considering these are floor/display models. That's only about 30% off of list: Typical discount in this case.

A few questions:

1. Who are you buying from?
2. What's are the dates on the back of the amp heads?
3. Will you get the factory warranty on both head and cabinet (I believe it's 2 years on warranty)?
4. Is the cabinet new or also a display model?

I would try and work the price down a bit. Maybe offer them $1,200. out the door. Particularly if the amp and cab are both floor/display models with full warranty. You just don't know what kind of use or mis-use has occured with this equipment.

[Don Edge]

The cab is new in-box. What kind of date am I looking for? I will be going there tomorrow to look at it and play it. I will be playing a floor model cab. I will try to work the price some more. I agree with you. They told me they can't sell the Eden stuff because it is too high end. Tim, sending you PM.