Ken's Corner (Bass Forums Sponsored By KSB)

Go Back   Ken's Corner (Bass Forums Sponsored By KSB) > Double Basses > Luthier's Corner

Reply
 
Thread Tools Display Modes
  #1  
Old 10-26-2010, 09:07 PM
Thomas Erickson's Avatar
Thomas Erickson Thomas Erickson is offline
Senior Posting Member
 
Join Date: 05-23-2010
Location: Pacific NW USA
Posts: 309
Thomas Erickson is on a distinguished road
Default

THat doesn't even look like it needs much restoration, just a little work to put it together... maybe a nice project!
Reply With Quote
  #2  
Old 10-26-2010, 09:32 PM
Thomas Erickson's Avatar
Thomas Erickson Thomas Erickson is offline
Senior Posting Member
 
Join Date: 05-23-2010
Location: Pacific NW USA
Posts: 309
Thomas Erickson is on a distinguished road
Default

Oh, and if you're like me, trying to put basses into something like autoCAD is about the biggest waste of time ever! But, I'm no engineer either; I have a scientific calculator but I barely know how to use it... It is interesting, however, to actually measure as many instruments as you can. I always mean to write them down and don't, but still, you get some insights into why things work the way they do that you might otherwise overlook.

Actually, that brings me to another comment - make a point of trying to draw and carve every day - even if it's just sketches and whittling it will help develop your eye, as well as coordination, muscles, sense of proportions, understanding of wood, everything. Plus it forces you to sharpen your tools a lot.

Kind of like how just playing basses and listening to music all the time will make you a better musician, even at times when you're not practicing for hours on end every day.
Reply With Quote
  #3  
Old 10-26-2010, 10:46 PM
Ruben E garcia Ruben E garcia is offline
Posting Member
 
Join Date: 10-04-2010
Location: Atlanta GA
Posts: 108
Ruben E garcia is on a distinguished road
Default

U guys know anything about this particular DB?

from the picture I cant tell if is a ply or carved top

http://atlanta.craigslist.org/atl/msg/2025308543.html

Last edited by Ruben E garcia; 10-26-2010 at 11:05 PM.
Reply With Quote
  #4  
Old 10-27-2010, 12:16 AM
Thomas Erickson's Avatar
Thomas Erickson Thomas Erickson is offline
Senior Posting Member
 
Join Date: 05-23-2010
Location: Pacific NW USA
Posts: 309
Thomas Erickson is on a distinguished road
Default

I'd say go have a look at it, if close by... Can't tell from the photos on the ad if it is solid or laminated.
Reply With Quote
  #5  
Old 10-27-2010, 03:59 PM
Ruben E garcia Ruben E garcia is offline
Posting Member
 
Join Date: 10-04-2010
Location: Atlanta GA
Posts: 108
Ruben E garcia is on a distinguished road
Default

Quote:
Originally Posted by Thomas Erickson View Post
I'd say go have a look at it, if close by... Can't tell from the photos on the ad if it is solid or laminated.
I sent an email to the seller asking about the top...
but about the maker: Curt Wunderlich Detroit. Made in Czechosovakia.. does it ring a bell?
Reply With Quote
  #6  
Old 11-01-2010, 09:32 AM
Arnold Schnitzer Arnold Schnitzer is offline
Senior Posting Member
 
Join Date: 01-22-2007
Location: Putnam County, NY
Posts: 453
Arnold Schnitzer is on a distinguished road
Default

In my opinion you need to get (and read) the Violin Repair book by Hans Weisshar. It is considered the "bible" for string instrument repair, and will not teach you bad habits. My thanks to Jeff Bollbach for turning me on to this great resource many years ago.
Reply With Quote
  #7  
Old 11-01-2010, 09:54 AM
Ruben E garcia Ruben E garcia is offline
Posting Member
 
Join Date: 10-04-2010
Location: Atlanta GA
Posts: 108
Ruben E garcia is on a distinguished road
Default

Quote:
Originally Posted by wayne holmes View Post
I think you did really good if it's carved. Good pictures. In some places it looks carved and in others I think that I see more than one layer.

One has to be impressed, inspired and even encouraged by your obvious passion and persistance.

There are a couple of things that stand out to me that lead me to believe that it had a pretty good maker and that it wasn't the cheapest model made in its day. The purfling is impressive if its inlayed and not painted on later. And, my experience has been that if you see a neck that has grain as the neck of your bass does, that the maker thought the bass worthy of a more expensive neck.

I wonder, since the neck looks long to me, if the scale length is a 43.5 inches.

You're on your way Ruben. Proud of you and happy for you!
Thank you Wayne I am following your advice, and every one good advise on this forum for pointing me in the right direction.
Now I need a good book about the subject…
Now the front is carve for sure and the back I think it have to be carve too (In my opinion), why because the curve, and the joint in the middle, you can also see in the label picture the little squares running thru all the back plate.

Well the dude say it was 41” not too sure I will measure and I’ll let you know
Reply With Quote
  #8  
Old 11-01-2010, 03:01 PM
Eric Hochberg Eric Hochberg is offline
Posting Member
 
Join Date: 02-02-2007
Location: Winnetka, IL
Posts: 189
Eric Hochberg is on a distinguished road
Default

Ruben, when a master luthier like Arnold Schnitzer suggests something, you really need to take it seriously and thank him for taking the time to help you. If you're planning on being a luthier that does fine work, you are probably going to have to invest some money in your education. Find the book used if you can. Why don't you look into apprenticing with someone?

I only jump in here because I know the futile feeling of trying to help people on forums and then either being rebuffed or ignored. Good luck with your project.
__________________
Eric Hochberg
erichochberg.com
Reply With Quote
  #9  
Old 11-01-2010, 04:38 PM
Ruben E garcia Ruben E garcia is offline
Posting Member
 
Join Date: 10-04-2010
Location: Atlanta GA
Posts: 108
Ruben E garcia is on a distinguished road
Default

Quote:
Originally Posted by Eric Hochberg View Post
Ruben, when a master luthier like Arnold Schnitzer suggests something, you really need to take it seriously and thank him for taking the time to help you. If you're planning on being a luthier that does fine work, you are probably going to have to invest some money in your education. Find the book used if you can. Why don't you look into apprenticing with someone?

I only jump in here because I know the futile feeling of trying to help people on forums and then either being rebuffed or ignored. Good luck with your project.
Thank you for pointing that… I very humbly apologize if I came across like dismissing anybody advise… I do have an deep admiration for one an every one of you guys… and that’s why I am here seeking for your advise…I wish I could have that book, trust me I was looking for it… I am checking up all that you guys suggest, and I going to see and local luthier as soon as possible too…
Reply With Quote
  #10  
Old 11-01-2010, 07:26 PM
Arnold Schnitzer Arnold Schnitzer is offline
Senior Posting Member
 
Join Date: 01-22-2007
Location: Putnam County, NY
Posts: 453
Arnold Schnitzer is on a distinguished road
Talking

Ruben, have no fear, no feelings were hurt. If you are in the Atlanta area, you could try and look up Emory Clements, a fine bassist and equally talented luthier. And seriously, start your search for a copy of the Weishaar book, even if you have to borrow one (and run to the copy center). Naah, I didn't mean that.
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 2 (0 members and 2 guests)
 

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT -4. The time now is 08:43 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright © 2007 - Ken Smith Basses, LTD. (All Rights Reserved)