Old hands... literaly

[Eric Swanson]

Your site looks good:

http://kcncproduction.com/index.html

What are your routers' Z capacity (machineable height)? I see from your site that you have three machines.

We have a five-axis machine where I work with a 5' x 20' bed (Routech) and are looking to get a five-axis Onsrud with 4' of Z capacity. My firm is involved with non-instrument-related woodworking; we haven't done any instrument parts, although we do a lot of compound curvature work.

Good for you for starting this up. From my perspective as an architectural woodworker and amateur player, I say, absolutely; get the bulk of the wood out of the way so that the skilled luthiers can do what they do best, the detailed work. Save the hands for the work that only they can do.

Looks as if you do some architectural woodwork, too. Nice to see the diversification.

Best of luck!

[Ken Smith]

Rick, in what part of your house is that machine you show? Will it interfere with dinner? I hate eating in a nice house with a machine running in the next room!

Looks nice.

[RC Williams]

Eric, I have one machine with 10" clearence and 12" z stroke, it's an old Motion Master I rebuilt last year, and I have one table with 14 " clearence and a 7" stroke , but I have the z mounted on a dovetail slide so I can move it up or down as needed. this is my 4 axis machine i use it for roughing scrolls and necks as well as trimming Bass Buggie bodies .

Ken, the noise isn't so much a problem at dinner as the table moving, suddenly your dinner is in front of someone else!

[Ken Smith]

Originally Posted by RC Williams

Eric, I have one machine with 10" clearence and 12" z stroke, it's an old Motion Master I rebuilt last year, and I have one table with 14 " clearence and a 7" stroke , but I have the z mounted on a dovetail slide so I can move it up or down as needed. this is my 4 axis machine i use it for roughing scrolls and necks as well as trimming Bass Buggie bodies .

Ken, the noise isn't so much a problem at dinner as the table moving, suddenly your dinner is in front of someone else!

Well then, just have the guy next to you make 'your' order. At least this way you get what you want,, lol