Starting a DB Project

[Ruben E garcia]

I can’t really argue with any of you guys... about witch cleat work the best (Square, Diamond, feather, bevel)... I am 100% sure that there is not a perfect cleat... but different cleats show advantages and disadvantages (and some may be just bad) ... as long I don’t align the grain of the cleat with the top (that's just stupid) 45Deg, 30, and even 90 would do....by the way I am not discarding anybody’s point of view is supper interesting getting deep into the suggest I do have now a clear understanding of Cleats.

But where I really fail it was to get the cleats correctly fit to the top… it doesn’t matter how good a cleat can be… it won’t hide the fact that is not correctly jointed to the top…. Mistake a do believe is a product of not enough pressure applied, not well fit between top and cleat, and possibly I am not using the right procedure for the glue up… Hide glue is unlike any other glue that I ever work…. That Crucial moment… I was:

1) Applying glue to the top
2) Applying glue to the Cleat
3) Rubbing both
4) Waiting few second for proper bounding (I read to use a hair dryer to heat up the glue a this stage, or may be a should use a heat gun “may be too hot???”)
5) And clamping….


Now let me see if I do understand 100% are u guys talking about opening the crack again…??? It isn’t close enough…. Or just re-cleat?

Ps I am leaning towards Diamonds.... J my wife would agree with me J