Would you change a Smith?

[Albert Smith]

Originally Posted by Tim Bishop

I suspect IF he has, he's determined that he prefers what he is currently using in his necks.


About 10 years ago, I had a Wenge/Paduk combination in a custom Ibanez 6-String. Overall, the bass just didn't have the mid-range bite and the crisp highs: Just warm and muddy sounding. I was not impressed with that combination of woods on that particular model bass.

Tim I played the SR-905 five string for about two years, the problem I had was in like kind a muddy sound and excessive hiss from either an incompatability issue with my rig at that time, a Hartke 700 watt Bass head running through Hartke 2 ten cab and one 15 cab. I had the bartolini pickups. But my question is how do you get rid of that muddy sound on the low end, how do you get to the warmth? With my ampeg all tube I have that, but if I ever go to a solid state how would you go about getting that tone?

[Tim Bishop]

Originally Posted by Albert Smith

Tim I played the SR-905 five string for about two years, the problem I had was in like kind a muddy sound and excessive hiss from either an incompatability issue with my rig at that time, a Hartke 700 watt Bass head running through Hartke 2 ten cab and one 15 cab. I had the bartolini pickups. But my question is how do you get rid of that muddy sound on the low end, how do you get to the warmth? With my ampeg all tube I have that, but if I ever go to a solid state how would you go about getting that tone?

Albert, it's all about the right equipment. You have the right bass, so, depending on your playing style, set-up, strings used, and amplification and/or pre-amp, you should be able to dial in whatever you need!

I've shared with you what I use and I stand by it and would put it up against anything.

[Albert Smith]

Originally Posted by Tim Bishop

Albert, it's all about the right equipment. You have the right bass, so, depending on your playing style, set-up, strings used, and amplification and/or pre-amp, you should be able to dial in whatever you need!

I've shared with you what I use and I stand by it and would put it up against anything.

My brother as always you have never lied, indeed currently for me there is no issue with warmth or clarity of mids/highs due to the rig and axe that I have been blessed with. But for those who do not at this time have a "Smith" or an Ampeg, Eden, etc, what do you recommend?

[Tim Bishop]

Originally Posted by Albert Smith

My brother as always you have never lied, indeed currently for me there is no issue with warmth or clarity of mids/highs due to the rig and axe that I have been blessed with. But for those who do not at this time have a "Smith" or an Ampeg, Eden, etc, what do you recommend?

I would recommend they start saving their money and spend some time reading the following thread!


http://www.smithbassforums.com/showt...hp?t=21&page=2

[Dave Cody]

I have found that string thru bodies have a lillte more string tention than the same bass going just through the bridge. I don't see the need with Ken's Basses. I do like the firmness of the string with a 2 piece bridge, in fact my Smith is the only single piece bridge bass that has ever been a keeper for me.